#!perl -w
# Copyright (C) 2019-2021 all contributors
# License: AGPL-3.0+
# edit frontend behavior test (t/replace.t for backend)
use strict;
use v5.10.1;
use PublicInbox::TestCommon;
use PublicInbox::MID qw(mid_clean);
require_git(2.6);
require_mods('DBD::SQLite');
my ($tmpdir, $for_destroy) = tmpdir();
my $inboxdir = "$tmpdir/v2";
my $file = 't/data/0001.patch';
my $eml = eml_load($file);
my $mid = mid_clean($eml->header('Message-ID'));
my $ibx = create_inbox 'v2edit', indexlevel => 'basic', version => 2,
tmpdir => $inboxdir, sub {
my ($im, $ibx) = @_;
$im->add($eml) or BAIL_OUT;
};
my $cfgfile = "$tmpdir/config";
local $ENV{PI_CONFIG} = $cfgfile;
my ($in, $out, $err, $cmd, $cur, $t);
my $git = PublicInbox::Git->new("$ibx->{inboxdir}/git/0.git");
my $opt = { 0 => \$in, 1 => \$out, 2 => \$err };
$t = '-F FILE'; {
$in = $out = $err = '';
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/boolean prefix/bool pfx/'";
$cmd = [ '-edit', "-F$file", $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t edit OK");
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
like($cur->header('Subject'), qr/bool pfx/, "$t message edited");
like($out, qr/[a-f0-9]{40,}/, "$t shows commit on success");
}
$t = '-m MESSAGE_ID'; {
$in = $out = $err = '';
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/bool pfx/boolean prefix/'";
$cmd = [ '-edit', "-m$mid", $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t edit OK");
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
like($cur->header('Subject'), qr/boolean prefix/, "$t message edited");
like($out, qr/[a-f0-9]{40,}/, "$t shows commit on success");
}
$t = 'no-op -m MESSAGE_ID'; {
$in = $out = $err = '';
my $before = $git->qx(qw(rev-parse HEAD));
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/bool pfx/boolean prefix/'";
$cmd = [ '-edit', "-m$mid", $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t succeeds");
my $prev = $cur;
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
is_deeply($cur, $prev, "$t makes no change");
like($cur->header('Subject'), qr/boolean prefix/,
"$t does not change message");
like($out, qr/NONE/, 'noop shows NONE');
my $after = $git->qx(qw(rev-parse HEAD));
is($after, $before, 'git head unchanged');
}
$t = 'no-op -m MESSAGE_ID w/Status: header'; { # because mutt does it
$in = $out = $err = '';
my $before = $git->qx(qw(rev-parse HEAD));
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/^Subject:.*/Status: RO\\n\$&/'";
$cmd = [ '-edit', "-m$mid", $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t succeeds");
my $prev = $cur;
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
is_deeply($cur, $prev, "$t makes no change");
like($cur->header('Subject'), qr/boolean prefix/,
"$t does not change message");
is($cur->header('Status'), undef, 'Status header not added');
like($out, qr/NONE/, 'noop shows NONE');
my $after = $git->qx(qw(rev-parse HEAD));
is($after, $before, 'git head unchanged');
}
$t = '-m MESSAGE_ID can change Received: headers'; {
$in = $out = $err = '';
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/^Subject:.*/Received: x\\n\$&/'";
$cmd = [ '-edit', "-m$mid", $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t succeeds");
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
like($cur->header('Subject'), qr/boolean prefix/,
"$t does not change Subject");
is($cur->header('Received'), 'x', 'added Received header');
}
$t = '-m miss'; {
$in = $out = $err = '';
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/boolean/FAIL/'";
$cmd = [ '-edit', "-m$mid-miss", $inboxdir ];
ok(!run_script($cmd, undef, $opt), "$t fails on invalid MID");
like($err, qr/No message found/, "$t shows error");
}
$t = 'non-interactive editor failure'; {
$in = $out = $err = '';
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 'END { exit 1 }'";
$cmd = [ '-edit', "-m$mid", $inboxdir ];
ok(!run_script($cmd, undef, $opt), "$t detected");
like($err, qr/END \{ exit 1 \}' failed:/, "$t shows error");
}
$t = 'mailEditor set in config'; {
$in = $out = $err = '';
my $rc = xsys(qw(git config), "--file=$cfgfile",
'publicinbox.maileditor',
"$^X -i -p -e 's/boolean prefix/bool pfx/'");
is($rc, 0, 'set publicinbox.mailEditor');
local $ENV{MAIL_EDITOR};
delete $ENV{MAIL_EDITOR};
local $ENV{GIT_EDITOR} = 'echo should not run';
$cmd = [ '-edit', "-m$mid", $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t edited message");
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
like($cur->header('Subject'), qr/bool pfx/, "$t message edited");
unlike($out, qr/should not run/, 'did not run GIT_EDITOR');
}
$t = '--raw and mbox escaping'; {
$in = $out = $err = '';
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/^\$/\\nFrom not mbox\\n/'";
$cmd = [ '-edit', "-m$mid", '--raw', $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t succeeds");
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
like($cur->body, qr/^From not mbox/sm, 'put "From " line into body');
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/^>From not/\$& an/'";
$cmd = [ '-edit', "-m$mid", $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t succeeds with mbox escaping");
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
like($cur->body, qr/^From not an mbox/sm,
'changed "From " line unescaped');
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/^From not an mbox\\n//s'";
$cmd = [ '-edit', "-m$mid", '--raw', $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t succeeds again");
$cur = PublicInbox::Eml->new($ibx->msg_by_mid($mid));
unlike($cur->body, qr/^From not an mbox/sm, "$t restored body");
}
$t = 'reuse Message-ID'; {
my @warn;
local $SIG{__WARN__} = sub { push @warn, @_ };
my $im = $ibx->importer(0);
ok($im->add($eml), "$t and re-add");
$im->done;
like($warn[0], qr/reused for mismatched content/, "$t got warning");
}
$t = 'edit ambiguous Message-ID with -m'; {
$in = $out = $err = '';
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/bool pfx/boolean prefix/'";
$cmd = [ '-edit', "-m$mid", $inboxdir ];
ok(!run_script($cmd, undef, $opt), "$t fails w/o --force");
like($err, qr/Multiple messages with different content found matching/,
"$t shows matches");
like($err, qr/GIT_DIR=.*git show/is, "$t shows git commands");
}
$t .= ' and --force'; {
$in = $out = $err = '';
local $ENV{MAIL_EDITOR} = "$^X -i -p -e 's/^Subject:.*/Subject:x/i'";
$cmd = [ '-edit', "-m$mid", '--force', $inboxdir ];
ok(run_script($cmd, undef, $opt), "$t succeeds");
like($err, qr/Will edit all of them/, "$t notes all will be edited");
my @dump = $git->qx(qw(cat-file --batch --batch-all-objects));
chomp @dump;
is_deeply([grep(/^Subject:/i, @dump)], [qw(Subject:x Subject:x)],
"$t edited both messages");
}
done_testing();