INSTALL             |  1 +
 README.md => README | 28 +++-------------------------
 STATEFILE           |  6 ++++++
 go.mod              |  7 +++++++
 go.sum              |  4 ++++
 syncer.go           | 12 +++++++-----

diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000000000000000000000000000000000000..abbbb06ace8ac5a316acffbe5182d75fdd38810b
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1 @@
+$ go get go.stargrave.org/syncer
diff --git a/README.md b/README
rename from README.md
rename to README
index 4aaa90b72e4a9e166ed7000330adfdd8ca209c0b..db5032ec26e0a827eac521cb6c40a5a1a64e0165 100644
--- a/README.md
+++ b/README
@@ -1,11 +1,7 @@
-# syncer
-
-Fast stateful file/disk data syncer.
+syncer -- fast stateful file/disk data syncer.
 
 WARNING: I advise you to use ZFS and its native send/recv commands.
 I abandoned that project because of that.
-
-## Description
 
 The main purpose of this utility is fast data synchronization between
 two hard drives: one is fast (SSD, SATA HDD), another is connected
@@ -16,14 +12,14 @@ This utility is stateful: it keeps precomputed data hashes in separate
 statefile and uses it to determine if we need to update block of data.
 
     # sync from very fast SSD to slow USB connected HDD
-    % ./syncer -src /dev/ada0 -dst /dev/da0 -state state.bin
+    $ syncer -src /dev/ada0 -dst /dev/da0 -state state.bin
     [%%%%%%]
     # all blocks were transferred to da0
 
 Now we have statefile containing cryptographic hashes of the blocks from
 source and copy of all read data in destination. Now if we run it again:
 
-    % ./syncer -src /dev/ada0 -dst /dev/da0 -state state.bin
+    $ syncer -src /dev/ada0 -dst /dev/da0 -state state.bin
     [....%.]
     # only one block was transferred to da0
 
@@ -38,21 +34,3 @@ (it is kept in memory), or larger transfer and smaller statefile. All
 writes are sequential.
 
 syncer is free software: see the file COPYING for copying conditions.
-
-## Installation
-
-    % mkdir -p src
-    % git clone git://git.cypherpunks.ru/syncer.git src/syncer
-    % export GOPATH=$(pwd)
-    % go get github.com/dchest/blake2b
-    % go build syncer  # syncer executable file should be in current directory
-
-## Statefile Format
-
-    SRC_SIZE || BLK_SIZE || HASH0 || HASH1 || ...
-
-`SRC_SIZE` contains size of the source, when it was initially read.
-`BLK_SIZE` is the blocksize used. Both are 64-bit big-endian unsigned
-integers. If either size or blocksize differs, then syncer will deny
-using that statefile as a precaution. `HASHx` is BLAKE2b-512 hash
-output, 64 bytes.
diff --git a/STATEFILE b/STATEFILE
new file mode 100644
index 0000000000000000000000000000000000000000..940d2148cdfa688468443375c588d0e042461fdc
--- /dev/null
+++ b/STATEFILE
@@ -0,0 +1,6 @@
+    SRC_SIZE || BLK_SIZE || HASH0 || HASH1 || ...
+
+SRC_SIZE contains size of the source, when it was initially read.
+BLK_SIZE is the blocksize used. Both are 64-bit big-endian unsigned
+integers. If either size or blocksize differs, then syncer will deny
+using that statefile as a precaution. HASHx is BLAKE3-256 hash output.
diff --git a/go.mod b/go.mod
new file mode 100644
index 0000000000000000000000000000000000000000..0f0808b0c5f88ac02b442f48dcc6bf74943c151e
--- /dev/null
+++ b/go.mod
@@ -0,0 +1,7 @@
+module go.stargrave.org/syncer
+
+go 1.18
+
+require lukechampine.com/blake3 v1.1.7
+
+require github.com/klauspost/cpuid/v2 v2.0.9 // indirect
diff --git a/go.sum b/go.sum
new file mode 100644
index 0000000000000000000000000000000000000000..090460b5e6c648b53a001cad743064d3ad2a7116
--- /dev/null
+++ b/go.sum
@@ -0,0 +1,4 @@
+github.com/klauspost/cpuid/v2 v2.0.9 h1:lgaqFMSdTdQYdZ04uHyN2d/eKdOMyi2YLSvlQIBFYa4=
+github.com/klauspost/cpuid/v2 v2.0.9/go.mod h1:FInQzS24/EEf25PyTYn52gqo7WaD8xa0213Md/qVLRg=
+lukechampine.com/blake3 v1.1.7 h1:GgRMhmdsuK8+ii6UZFDL8Nb+VyMwadAgcJyfYHxG6n0=
+lukechampine.com/blake3 v1.1.7/go.mod h1:tkKEOtDkNtklkXtLNEOGNq5tcV90tJiA1vAA12R78LA=
diff --git a/syncer.go b/syncer.go
index e745d739b4f0114ba773925652841288351dbe38..f6159b3a387ceca3a869b30f6fb390576097fdc0 100644
--- a/syncer.go
+++ b/syncer.go
@@ -1,6 +1,6 @@
 /*
 syncer -- stateful file/device data syncer.
-Copyright (C) 2015-2020 Sergey Matveev <stargrave@stargrave.org>
+Copyright (C) 2015-2022 Sergey Matveev <stargrave@stargrave.org>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -28,8 +28,10 @@ 	"log"
 	"os"
 	"runtime"
 
-	"github.com/dchest/blake2b"
+	"lukechampine.com/blake3"
 )
+
+const HashSize = 256 / 8
 
 var (
 	blkSize   = flag.Int64("blk", 2*1<<10, "Block size (KiB)")
@@ -86,7 +88,7 @@ 	}
 	defer dst.Close()
 
 	// Check if we already have statefile and read the state
-	state := make([]byte, blake2b.Size*blocks)
+	state := make([]byte, HashSize*blocks)
 	var i int64
 	var tmp []byte
 	if _, err := os.Stat(*statePath); err == nil {
@@ -178,8 +180,8 @@ 		}
 		sync := make(chan SyncEvent)
 		syncs <- sync
 		go func(i int64) {
-			sum := blake2b.Sum512(buf[:n])
-			sumState := state[i*blake2b.Size : i*blake2b.Size+blake2b.Size]
+			sum := blake3.Sum256(buf[:n])
+			sumState := state[i*HashSize : i*HashSize+HashSize]
 			if bytes.Compare(sumState, sum[:]) != 0 {
 				sync <- SyncEvent{i, buf, buf[:n]}
 				prn.Changed()