-#!/usr/bin/perl -w
-# Copyright (C) 2014-2015 all contributors <meta@public-inbox.org>
-# License: AGPLv3 or later (https://www.gnu.org/licenses/agpl-3.0.txt)
-#
-# Initializes a public-inbox, basically a wrapper for git-init(1)
+#!perl -w
+# Copyright (C) 2014-2021 all contributors <meta@public-inbox.org>
+# License: AGPL-3.0+ <https://www.gnu.org/licenses/agpl-3.0.txt>
use strict;
-use warnings;
-my $usage = "public-inbox-init NAME GIT_DIR HTTP_URL ADDRESS [ADDRESS..]";
-use PublicInbox::Config;
-use File::Temp qw/tempfile/;
-use File::Basename qw/dirname/;
-use File::Path qw/mkpath/;
-use Cwd qw/abs_path/;
-
-sub x { system(@_) and die join(' ', @_). " failed: $?\n" }
-sub usage { print STDERR "Usage: $usage\n"; exit 1 }
-
-my $name = shift @ARGV or usage();
-my $git_dir = shift @ARGV or usage();
-my $http_url = shift @ARGV or usage();
+use v5.10.1;
+use Getopt::Long qw/:config gnu_getopt no_ignore_case auto_abbrev/;
+use Fcntl qw(:DEFAULT);
+my $help = <<EOF; # the following should fit w/o scrolling in 80x24 term:
+usage: public-inbox-init NAME INBOX_DIR HTTP_URL ADDRESS [ADDRESS..]
+
+ Initialize a public-inbox
+
+required arguments:
+
+ NAME the name of the inbox
+ INBOX_DIR pathname the inbox
+ HTTP_URL HTTP (or HTTPS) URL
+ ADDRESS email address(es), may be specified multiple times
+
+options:
+
+ -V2 use scalable public-inbox-v2-format(5)
+ -L LEVEL index level `basic', `medium', or `full' (default: full)
+ --ng NEWSGROUP set NNTP newsgroup name
+ -c KEY=VALUE set additional config option(s)
+ --skip-artnum=NUM NNTP article numbers to skip
+ --skip-epoch=NUM epochs to skip (-V2 only)
+ -j JOBS number of indexing jobs (-V2 only), (default: 4)
+
+See public-inbox-init(1) man page for full documentation.
+EOF
+
+require PublicInbox::Admin;
+PublicInbox::Admin::require_or_die('-base');
+
+my ($version, $indexlevel, $skip_epoch, $skip_artnum, $jobs, $show_help);
+my $skip_docdata;
+my $ng = '';
+my (@c_extra, @chdir);
+my %opts = (
+ 'V|version=i' => \$version,
+ 'L|index-level|indexlevel=s' => \$indexlevel,
+ 'S|skip|skip-epoch=i' => \$skip_epoch,
+ 'skip-artnum=i' => \$skip_artnum,
+ 'j|jobs=i' => \$jobs,
+ 'ng|newsgroup=s' => \$ng,
+ 'skip-docdata' => \$skip_docdata,
+ 'help|h' => \$show_help,
+ 'c=s@' => \@c_extra,
+ 'C=s@' => \@chdir,
+);
+my $usage_cb = sub {
+ print STDERR $help;
+ exit 1;
+};
+GetOptions(%opts) or $usage_cb->();
+if ($show_help) { print $help; exit 0 };
+my $name = shift @ARGV or $usage_cb->();
+my $inboxdir = shift @ARGV or $usage_cb->();
+my $http_url = shift @ARGV or $usage_cb->();
my (@address) = @ARGV;
-@address or usage();
-my %seen;
+@address or $usage_cb->();
++PublicInbox::Admin::do_chdir(\@chdir);
+
+@c_extra = map {
+ my ($k, $v) = split(/=/, $_, 2);
+ defined($v) or die "Usage: -c KEY=VALUE\n";
+ $k =~ /\A[a-z]+\z/i or die "$k contains invalid characters\n";
+ $k = lc($k);
+ if ($k eq 'newsgroup') {
+ die "newsgroup already set ($ng)\n" if $ng ne '';
+ $ng = $v;
+ ();
+ } elsif ($k eq 'address') {
+ push @address, $v; # for conflict checking
+ ();
+ } elsif ($k =~ /\A(?:inboxdir|mainrepo)\z/) {
+ die "$k not allowed via -c $_\n"
+ } elsif ($k eq 'indexlevel') {
+ defined($indexlevel) and
+ die "indexlevel already set ($indexlevel)\n";
+ $indexlevel = $v;
+ ();
+ } else {
+ $_
+ }
+} @c_extra;
+
+PublicInbox::Admin::indexlevel_ok_or_die($indexlevel) if defined $indexlevel;
+$ng =~ m![^A-Za-z0-9/_\.\-\~\@\+\=:]! and
+ die "--newsgroup `$ng' is not valid\n";
+($ng =~ m!\A\.! || $ng =~ m!\.\z!) and
+ die "--newsgroup `$ng' must not start or end with `.'\n";
+
+require PublicInbox::Config;
my $pi_config = PublicInbox::Config->default_file;
-my $dir = dirname($pi_config);
-mkpath($dir); # will croak on fatal errors
-my ($fh, $filename) = tempfile('pi-init-XXXXXXXX', DIR => $dir);
+my ($dir) = ($pi_config =~ m!(.*?/)[^/]+\z!);
+require File::Path;
+File::Path::mkpath($dir); # will croak on fatal errors
+
+# first, we grab a flock to prevent simultaneous public-inbox-init
+# processes from trampling over each other, or exiting with 255 on
+# O_EXCL failure below. This gets unlocked automatically on exit:
+require PublicInbox::Lock;
+my $lock_obj = { lock_path => "$pi_config.flock" };
+PublicInbox::Lock::lock_acquire($lock_obj);
+
+# git-config will operate on this (and rename on success):
+require File::Temp;
+my $fh = File::Temp->new(TEMPLATE => 'pi-init-XXXX', DIR => $dir);
+
+# Now, we grab another lock to use git-config(1) locking, so it won't
+# wait on the lock, unlike some of our internal flock()-based locks.
+# This is to prevent direct git-config(1) usage from clobbering our
+# changes.
+my $lockfile = "$pi_config.lock";
+my $lockfh;
+sysopen($lockfh, $lockfile, O_RDWR|O_CREAT|O_EXCL) or do {
+ warn "could not open config file: $lockfile: $!\n";
+ exit(255);
+};
+require PublicInbox::OnDestroy;
+my $auto_unlink = PublicInbox::OnDestroy->new($$, sub { unlink $lockfile });
+my ($perm, %seen);
if (-e $pi_config) {
open(my $oh, '<', $pi_config) or die "unable to read $pi_config: $!\n";
- my $old;
- {
- local $/;
- $old = <$oh>;
- }
+ my @st = stat($oh);
+ $perm = $st[2];
+ defined $perm or die "(f)stat failed on $pi_config: $!\n";
+ chmod($perm & 07777, $fh) or
+ die "(f)chmod failed on future $pi_config: $!\n";
+ defined(my $old = do { local $/; <$oh> }) or die "read $pi_config: $!\n";
print $fh $old or die "failed to write: $!\n";
close $oh or die "failed to close $pi_config: $!\n";
foreach my $addr (@address) {
my $found = $cfg->lookup($addr);
if ($found) {
- if ($found->{listname} ne $name) {
+ if ($found->{name} ne $name) {
print STDERR
"`$addr' already defined for ",
- "`$found->{listname}',\n",
+ "`$found->{name}',\n",
"does not match intend `$name'\n";
$conflict = 1;
} else {
}
exit(1) if $conflict;
+
+ my $ibx = $cfg->lookup_name($name);
+ $indexlevel //= $ibx->{indexlevel} if $ibx;
}
-close $fh or die "failed to close $filename: $!\n";
+my $pi_config_tmp = $fh->filename;
+close($fh) or die "failed to close $pi_config_tmp: $!\n";
my $pfx = "publicinbox.$name";
-my @x = (qw/git config/, "--file=$filename");
-$git_dir = abs_path($git_dir);
-x(qw(git init -q --bare), $git_dir);
+my @x = (qw/git config/, "--file=$pi_config_tmp");
+
+$inboxdir = PublicInbox::Config::rel2abs_collapsed($inboxdir);
+die "`\\n' not allowed in `$inboxdir'\n" if index($inboxdir, "\n") >= 0;
+
+if (-f "$inboxdir/inbox.lock") {
+ if (!defined $version) {
+ $version = 2;
+ } elsif ($version != 2) {
+ die "$inboxdir is a -V2 inbox, -V$version specified\n"
+ }
+} elsif (-d "$inboxdir/objects") {
+ if (!defined $version) {
+ $version = 1;
+ } elsif ($version != 1) {
+ die "$inboxdir is a -V1 inbox, -V$version specified\n"
+ }
+}
+
+$version = 1 unless defined $version;
+
+if ($version == 1 && defined $skip_epoch) {
+ die "--skip-epoch is only supported for -V2 inboxes\n";
+}
+
+my $ibx = PublicInbox::Inbox->new({
+ inboxdir => $inboxdir,
+ name => $name,
+ version => $version,
+ -primary_address => $address[0],
+ indexlevel => $indexlevel,
+});
+
+my $creat_opt = {};
+if (defined $jobs) {
+ die "--jobs is only supported for -V2 inboxes\n" if $version == 1;
+ die "--jobs=$jobs must be >= 1\n" if $jobs <= 0;
+ $creat_opt->{nproc} = $jobs;
+}
+
+require PublicInbox::InboxWritable;
+$ibx = PublicInbox::InboxWritable->new($ibx, $creat_opt);
+if ($skip_docdata) {
+ $ibx->{indexlevel} //= 'full'; # ensure init_inbox writes xdb
+ $ibx->{indexlevel} eq 'basic' and
+ die "--skip-docdata ignored with --indexlevel=basic\n";
+ $ibx->{-skip_docdata} = $skip_docdata;
+}
+$ibx->init_inbox(0, $skip_epoch, $skip_artnum);
+
+# needed for git prior to v2.1.0
+umask(0077) if defined $perm;
+
+require PublicInbox::Spawn;
+PublicInbox::Spawn->import(qw(run_die));
+
foreach my $addr (@address) {
next if $seen{lc($addr)};
- x(@x, "--add", "$pfx.address", $addr);
+ run_die([@x, "--add", "$pfx.address", $addr]);
+}
+run_die([@x, "$pfx.url", $http_url]);
+run_die([@x, "$pfx.inboxdir", $inboxdir]);
+
+if (defined($indexlevel)) {
+ run_die([@x, "$pfx.indexlevel", $indexlevel]);
+}
+run_die([@x, "$pfx.newsgroup", $ng]) if $ng ne '';
+
+for my $kv (@c_extra) {
+ my ($k, $v) = split(/=/, $kv, 2);
+ # git 2.30+ has --fixed-value for idempotent invocations,
+ # but that's too new to depend on in 2021. Perl quotemeta
+ # seems compatible enough for POSIX ERE which git uses
+ my $re = '^'.quotemeta($v).'$';
+ run_die([@x, qw(--replace-all), "$pfx.$k", $v, $re]);
+}
+
+# needed for git prior to v2.1.0
+if (defined $perm) {
+ chmod($perm & 07777, $pi_config_tmp) or
+ die "(f)chmod failed on future $pi_config: $!\n";
}
-x(@x, "$pfx.url", $http_url);
-x(@x, "$pfx.mainrepo", $git_dir);
-rename $filename, $pi_config or
- die "failed to rename `$filename' to `$pi_config': $!\n";
+rename $pi_config_tmp, $pi_config or
+ die "failed to rename `$pi_config_tmp' to `$pi_config': $!\n";
+undef $auto_unlink; # trigger ->DESTROY
+
+my $f = "$inboxdir/description";
+if (sysopen $fh, $f, O_CREAT|O_EXCL|O_WRONLY) {
+ print $fh "public inbox for $address[0]\n" or die "print($f): $!";
+ close $fh or die "close($f): $!";
+}