# Initially based on
# https://github.com/joshuaclayton/dotfiles/blob/master/zsh_profile.d/autoenv.zsh
-export AUTOENV_ENV_FILENAME=$HOME/.env_auth
+# File to store confirmed authentication into.
+# This handles the deprecated, old location(s).
+if [[ -z $AUTOENV_AUTH_FILE ]]; then
+ if [[ -n $AUTOENV_ENV_FILENAME ]]; then
+ echo "zsh-autoenv: using deprecated setting for AUTOENV_AUTH_FILE from AUTOENV_ENV_FILENAME." >&2
+ echo "Please set AUTOENV_AUTH_FILE instead." >&2
+ AUTOENV_AUTH_FILE=$AUTOENV_ENV_FILENAME
+ else
+ if [[ -n $XDG_DATA_HOME ]]; then
+ AUTOENV_AUTH_FILE=$XDG_DATA_HOME/autoenv_auth
+ else
+ AUTOENV_AUTH_FILE=~/.local/share/autoenv_auth
+ fi
+ if [[ -f ~/.env_auth ]]; then
+ echo "zsh-autoenv: using deprecated location for AUTOENV_AUTH_FILE." >&2
+ echo "Please move it: mv ~/.env_auth ${(D)AUTOENV_AUTH_FILE}." >&2
+ AUTOENV_AUTH_FILE=~/.env_auth
+ fi
+ fi
+fi
-# Name of file to look for when entering directories.
-: ${AUTOENV_FILE_ENTER:=.env}
+# Name of the file to look for when entering directories.
+: ${AUTOENV_FILE_ENTER:=.autoenv.zsh}
-# Name of file to look for when leaving directories.
+# Name of the file to look for when leaving directories.
# Requires AUTOENV_HANDLE_LEAVE=1.
-: ${AUTOENV_FILE_LEAVE:=.env.leave}
+: ${AUTOENV_FILE_LEAVE:=.autoenv_leave.zsh}
-# Look for .env in parent dirs?
+# Look for zsh-autoenv "enter" files in parent dirs?
: ${AUTOENV_LOOK_UPWARDS:=1}
# Handle leave events when changing away from a subtree, where an "enter"
# Enable debugging. Multiple levels are supported (max 2).
: ${AUTOENV_DEBUG:=0}
-# Public helper functions, which can be used from your .env files:
+# (Temporarily) disable zsh-autoenv. This gets looked at in the chpwd handler.
+: ${AUTOENV_DISABLED:=0}
+
+# Public helper functions, which can be used from your .autoenv.zsh files:
#
-# Source the next .env file from parent directories.
-# This is useful if you want to use a base .env file for a directory subtree.
+# Source the next .autoenv.zsh file from parent directories.
+# This is useful if you want to use a base .autoenv.zsh file for a directory
+# subtree.
autoenv_source_parent() {
- local parent_env_file=$(_autoenv_get_file_upwards $PWD)
+ local look_until=${1:-/}
+ local parent_env_file=$(_autoenv_get_file_upwards \
+ ${autoenv_env_file:h} ${AUTOENV_FILE_ENTER} $look_until)
if [[ -n $parent_env_file ]] \
&& _autoenv_check_authorized_env_file $parent_env_file; then
_autoenv_debug "Calling autoenv_source_parent: parent_env_file:$parent_env_file"
-
- local parent_env_dir=${parent_env_file:A:h}
-
- _autoenv_stack_entered_add $parent_env_file
-
- _autoenv_source $parent_env_file enter $parent_env_dir
+ _autoenv_source $parent_env_file enter
fi
}
# Internal functions. {{{
# Internal: stack of entered (and handled) directories. {{{
-_autoenv_stack_entered=()
-typeset -A _autoenv_stack_entered_mtime
-_autoenv_stack_entered_mtime=()
+typeset -g -a _autoenv_stack_entered
+# -g: make it global, this is required when used with antigen.
+typeset -g -A _autoenv_stack_entered_mtime
# Add an entry to the stack, and remember its mtime.
_autoenv_stack_entered_add() {
local env_file=$1
- _autoenv_debug "[stack] adding: $env_file" 2
-
# Remove any existing entry.
_autoenv_stack_entered_remove $env_file
+ _autoenv_debug "[stack] adding: $env_file" 2
+
# Append it to the stack, and remember its mtime.
_autoenv_stack_entered+=($env_file)
_autoenv_stack_entered_mtime[$env_file]=$(_autoenv_get_file_mtime $env_file)
}
-_autoenv_get_file_mtime() {
- if [[ -f $1 ]]; then
- zstat +mtime $1
- else
- echo 0
- fi
-}
+
+# zstat_mime helper, conditionally defined.
+# Load zstat module, but only its builtin `zstat`.
+if ! zmodload -F zsh/stat b:zstat 2>/dev/null; then
+ # If the module is not available, define a wrapper around `stat`, and use its
+ # terse output instead of format, which is not supported by busybox.
+ # Assume '+mtime' as $1.
+ _autoenv_get_file_mtime() {
+ # setopt localoptions pipefail
+ local stat
+ stat=$(stat -t $1 2>/dev/null)
+ if [[ -n $stat ]]; then
+ echo ${${(s: :)stat}[13]}
+ else
+ echo 0
+ fi
+ }
+else
+ _autoenv_get_file_mtime() {
+ zstat +mtime $1 2>/dev/null || echo 0
+ }
+fi
+
# Remove an entry from the stack.
_autoenv_stack_entered_remove() {
}
# Is the given entry already in the stack?
+# This checks for the env_file ($1) as-is and with symlinks resolved.
_autoenv_stack_entered_contains() {
local env_file=$1
+ local f i
if (( ${+_autoenv_stack_entered[(r)${env_file}]} )); then
# Entry is in stack.
- if [[ $_autoenv_stack_entered_mtime[$env_file] == $(_autoenv_get_file_mtime $env_file) ]]; then
+ f=$env_file
+ else
+ for i in $_autoenv_stack_entered; do
+ if [[ ${i:A} == ${env_file:A} ]]; then
+ # Entry is in stack (compared with resolved symlinks).
+ f=$i
+ break
+ fi
+ done
+ fi
+ if [[ -n $f ]]; then
+ if [[ $_autoenv_stack_entered_mtime[$f] == $(_autoenv_get_file_mtime $f) ]]; then
# Entry has the expected mtime.
return
fi
return
fi
# Load zsh color support.
- if [[ -z $colors ]]; then
+ if [[ -z $color ]]; then
autoload colors
colors
fi
}
# }}}
-# Load zstat module, but only its builtin `zstat`.
-zmodload -F zsh/stat b:zstat
-
# Generate hash pair for a given file ($1).
# A fixed hash value can be given as 2nd arg, but is used with tests only.
+# The format is ":$file:$hash:$version".
_autoenv_hash_pair() {
local env_file=${1:A}
- local env_shasum
- if [[ -n $2 ]]; then
- env_shasum=$2
- else
+ local env_shasum=${2:-}
+ if [[ -z $env_shasum ]]; then
if ! [[ -e $env_file ]]; then
echo "Missing file argument for _autoenv_hash_pair!" >&2
return 1
fi
env_shasum=$(shasum $env_file | cut -d' ' -f1)
fi
- echo "$env_file:$env_shasum:1"
+ echo ":${env_file}:${env_shasum}:1"
}
_autoenv_authorized_env_file() {
local env_file=$1
local pair=$(_autoenv_hash_pair $env_file)
- test -f $AUTOENV_ENV_FILENAME \
- && \grep -qF $pair $AUTOENV_ENV_FILENAME
+ test -f $AUTOENV_AUTH_FILE \
+ && \grep -qF $pair $AUTOENV_AUTH_FILE
}
_autoenv_authorize() {
- local env_file=$1
+ local env_file=${1:A}
_autoenv_deauthorize $env_file
- _autoenv_hash_pair $env_file >> $AUTOENV_ENV_FILENAME
+ _autoenv_hash_pair $env_file >>| $AUTOENV_AUTH_FILE
}
+# Deauthorize a given filename, by removing it from the auth file.
+# This uses `test -s` to only handle non-empty files, and a subshell to
+# allow for writing to the same file again.
_autoenv_deauthorize() {
- local env_file=$1
- if [[ -f $AUTOENV_ENV_FILENAME ]]; then
- echo $(\grep -vF $env_file $AUTOENV_ENV_FILENAME) > $AUTOENV_ENV_FILENAME
+ local env_file=${1:A}
+ if [[ -s $AUTOENV_AUTH_FILE ]]; then
+ echo "$(\grep -vF :${env_file}: $AUTOENV_AUTH_FILE)" >| $AUTOENV_AUTH_FILE
fi
}
return 1
fi
if ! _autoenv_authorized_env_file $1; then
- echo "Attempting to load unauthorized env file!"
- command ls -l $1
- echo ""
- echo "**********************************************"
- echo ""
- cat $1
- echo ""
- echo "**********************************************"
- echo ""
- echo -n "Would you like to authorize it? (type 'yes') "
+ echo "Attempting to load unauthorized env file!" >&2
+ command ls -l $1 >&2
+ echo >&2
+ echo "**********************************************" >&2
+ echo >&2
+ command cat $1 >&2
+ echo >&2
+ echo "**********************************************" >&2
+ echo >&2
+ echo -n "Would you like to authorize it? (type 'yes') " >&2
+ # echo "Would you like to authorize it?"
+ # echo "('yes' to allow, 'no' to not being asked again; otherwise ignore it for the shell) "
if ! _autoenv_ask_for_yes; then
return 1
return 0
}
-# Get directory of this file (absolute, with resolved symlinks).
-_autoenv_source_dir=${0:A:h}
-
_autoenv_source() {
local env_file=$1
autoenv_event=$2
local _autoenv_envfile_dir=${3:-${1:A:h}}
- autoenv_from_dir=$_autoenv_chpwd_prev_dir
+ autoenv_from_dir=$OLDPWD
autoenv_to_dir=$PWD
+ autoenv_env_file=$env_file
# Source varstash library once.
if [[ -z "$functions[(I)autostash]" ]]; then
- source $_autoenv_source_dir/lib/varstash
+ source ${${funcsourcetrace[1]%:*}:h}/lib/varstash
# NOTE: Varstash uses $PWD as default for varstash_dir, we might set it to
# ${env_file:h}.
fi
- # Change to directory of env file, source it and cd back.
- local new_dir=$PWD
- builtin cd -q $_autoenv_envfile_dir
- _autoenv_debug "== SOURCE: ${bold_color}$env_file${reset_color}\n PWD: $PWD"
- (( _autoenv_debug_indent++ ))
+ # Source the env file.
+ _autoenv_debug "== SOURCE: ${bold_color:-}$env_file${reset_color:-}\n PWD: $PWD"
+ : $(( _autoenv_debug_indent++ ))
source $env_file
- (( _autoenv_debug_indent-- ))
+ : $(( _autoenv_debug_indent-- ))
_autoenv_debug "== END SOURCE =="
- builtin cd -q $new_dir
+
+ if [[ $autoenv_event == enter ]]; then
+ _autoenv_stack_entered_add $env_file
+ fi
# Unset vars set for enter/leave scripts.
# This should not get done for recursion (via autoenv_source_parent),
# and can be useful to have in general after autoenv was used.
- # unset autoenv_event autoenv_from_dir autoenv_to_dir
+ # unset autoenv_event autoenv_from_dir autoenv_to_dir autoenv_env_file
+ if [[ $autoenv_event == leave ]]; then
+ unset autoenv_env_file
+ fi
}
_autoenv_get_file_upwards() {
local look_from=${1:-$PWD}
local look_for=${2:-$AUTOENV_FILE_ENTER}
+ local look_until=${${3:-/}:A}
# Manually look in parent dirs. An extended Zsh glob should use Y1 for
# performance reasons, which is only available in zsh-5.0.5-146-g9381bb6.
break
fi
+ if [[ $parent_dir == $look_until ]]; then
+ break
+ fi
last=$parent_dir
parent_dir="${parent_dir}/.."
done
}
-_autoenv_chpwd_prev_dir=$PWD
_autoenv_chpwd_handler() {
- local env_file="$PWD/$AUTOENV_FILE_ENTER"
-
_autoenv_debug "Calling chpwd handler: PWD=$PWD"
+ if (( $AUTOENV_DISABLED )); then
+ _autoenv_debug "Disabled (AUTOENV_DISABLED)."
+ return
+ fi
+
+ local env_file="$PWD/$AUTOENV_FILE_ENTER"
+ _autoenv_debug "env_file: $env_file"
+
# Handle leave event for previously sourced env files.
if [[ $AUTOENV_HANDLE_LEAVE == 1 ]] && (( $#_autoenv_stack_entered )); then
local prev_file prev_dir
for prev_file in ${_autoenv_stack_entered}; do
- prev_dir=${prev_file:A:h}
- if ! [[ ${PWD:A}/ == ${prev_dir}/* ]]; then
+ prev_dir=${prev_file:h}
+ if ! [[ ${PWD}/ == ${prev_dir}/* ]]; then
local env_file_leave=$prev_dir/$AUTOENV_FILE_LEAVE
if _autoenv_check_authorized_env_file $env_file_leave; then
_autoenv_source $env_file_leave leave $prev_dir
fi
+
+ # Unstash any autostashed stuff.
+ varstash_dir=$prev_dir autounstash
+
_autoenv_stack_entered_remove $prev_file
fi
done
if ! [[ -f $env_file ]] && [[ $AUTOENV_LOOK_UPWARDS == 1 ]]; then
env_file=$(_autoenv_get_file_upwards $PWD)
if [[ -z $env_file ]]; then
- _autoenv_chpwd_prev_dir=$PWD
return
fi
fi
# directories.
if _autoenv_stack_entered_contains $env_file; then
_autoenv_debug "Already in stack: $env_file"
- _autoenv_chpwd_prev_dir=$PWD
return
fi
if ! _autoenv_check_authorized_env_file $env_file; then
- _autoenv_chpwd_prev_dir=$PWD
return
fi
- _autoenv_stack_entered_add $env_file
-
# Source the enter env file.
_autoenv_debug "Sourcing from chpwd handler: $env_file"
_autoenv_source $env_file enter
- _autoenv_chpwd_prev_dir=$PWD
-
- (( _autoenv_debug_indent++ ))
+ : $(( _autoenv_debug_indent++ ))
}
# }}}