-# Copyright (C) 2016-2019 all contributors <meta@public-inbox.org>
+# Copyright (C) 2016-2020 all contributors <meta@public-inbox.org>
# License: AGPL-3.0+ <https://www.gnu.org/licenses/agpl-3.0.txt>
# Like most Perl modules in public-inbox, this is internal and
# operate in. This can be useful to ensure smaller inboxes can
# be cloned while cloning of large inboxes is maxed out.
#
-# This does not depend on Danga::Socket or any other external
+# This does not depend on PublicInbox::DS or any other external
# scheduling mechanism, you just need to call start() and finish()
-# appropriately. However, public-inbox-httpd (which uses Danga::Socket)
+# appropriately. However, public-inbox-httpd (which uses PublicInbox::DS)
# will be able to schedule this based on readability of stdout from
# the spawned process. See GitHTTPBackend.pm and SolverGit.pm for
# usage examples. It does not depend on any form of threading.
use strict;
use warnings;
use PublicInbox::Spawn qw(popen_rd);
-require Plack::Util;
+
+# n.b.: we get EAGAIN with public-inbox-httpd, and EINTR on other PSGI servers
+use Errno qw(EAGAIN EINTR);
my $def_limiter;
# declares a command to spawn (but does not spawn it).
# $cmd is the command to spawn
-# $env is the environ for the child process
+# $cmd_env is the environ for the child process (not PSGI env)
# $opt can include redirects and perhaps other process spawning options
sub new ($$$;) {
- my ($class, $cmd, $env, $opt) = @_;
- bless { args => [ $cmd, $env, $opt ] }, $class;
+ my ($class, $cmd, $cmd_env, $opt) = @_;
+ bless { args => [ $cmd, $cmd_env, $opt ] }, $class;
}
sub _do_spawn {
- my ($self, $cb) = @_;
+ my ($self, $start_cb, $limiter) = @_;
my $err;
+ my ($cmd, $cmd_env, $opt) = @{$self->{args}};
+ my %o = %{$opt || {}};
+ $self->{limiter} = $limiter;
+ foreach my $k (PublicInbox::Spawn::RLIMITS()) {
+ if (defined(my $rlimit = $limiter->{$k})) {
+ $o{$k} = $rlimit;
+ }
+ }
+ eval {
+ # popen_rd may die on EMFILE, ENFILE
+ ($self->{rpipe}, $self->{pid}) = popen_rd($cmd, $cmd_env, \%o);
+ $self->{args} = $o{quiet} ? undef : $cmd;
- ($self->{rpipe}, $self->{pid}) = popen_rd(@{$self->{args}});
- if (defined $self->{pid}) {
- $self->{limiter}->{running}++;
- } else {
- $self->{err} = $!;
+ die "E: $!" unless defined($self->{pid});
+
+ $limiter->{running}++;
+ $start_cb->($self); # EPOLL_CTL_ADD may ENOSPC/ENOMEM
+ };
+ if ($@) {
+ $self->{err} = $@;
+ finish($self);
}
- $cb->($self->{rpipe});
}
sub child_err ($) {
$msg;
}
-sub finish ($) {
- my ($self) = @_;
+sub log_err ($$) {
+ my ($env, $msg) = @_;
+ $env->{'psgi.errors'}->print($msg, "\n");
+}
+
+# callback for dwaitpid
+sub waitpid_err ($$) {
+ my ($self, $pid) = @_;
+ my $xpid = delete $self->{pid};
+ my $err;
+ if ($pid > 0) { # success!
+ $err = child_err($?);
+ } elsif ($pid < 0) { # ??? does this happen in our case?
+ $err = "W: waitpid($xpid, 0) => $pid: $!";
+ } # else should not be called with pid == 0
+
+ my ($env, $qx_cb, $qx_arg, $qx_buf) =
+ delete @$self{qw(psgi_env qx_cb qx_arg qx_buf)};
+
+ # done, spawn whatever's in the queue
my $limiter = $self->{limiter};
- my $running;
- if (delete $self->{rpipe}) {
- my $pid = delete $self->{pid};
- $self->{err} = $pid == waitpid($pid, 0) ? child_err($?) :
- "PID:$pid still running?";
- $running = --$limiter->{running};
+ my $running = --$limiter->{running};
+
+ if ($running < $limiter->{max}) {
+ if (my $next = shift(@{$limiter->{run_queue}})) {
+ _do_spawn(@$next, $limiter);
+ }
}
- # limiter->{max} may change dynamically
- if (($running || $limiter->{running}) < $limiter->{max}) {
- if (my $next = shift @{$limiter->{run_queue}}) {
- _do_spawn(@$next);
+ if ($err) {
+ if ($self->{err}) {
+ $self->{err} .= "; $err";
+ } else {
+ $self->{err} = $err;
+ }
+ if ($env && $self->{args}) {
+ log_err($env, join(' ', @{$self->{args}}) . ": $err");
}
}
- $self->{err};
+ eval { $qx_cb->($qx_buf, $qx_arg) } if $qx_cb;
}
-sub start {
- my ($self, $limiter, $cb) = @_;
- $self->{limiter} = $limiter;
+sub do_waitpid ($) {
+ my ($self) = @_;
+ my $pid = $self->{pid};
+ # PublicInbox::DS may not be loaded
+ eval { PublicInbox::DS::dwaitpid($pid, \&waitpid_err, $self) };
+ # done if we're running in PublicInbox::DS::EventLoop
+ if ($@) {
+ # non public-inbox-{httpd,nntpd} callers may block:
+ my $ret = waitpid($pid, 0);
+ waitpid_err($self, $ret);
+ }
+}
+
+sub finish ($) {
+ my ($self) = @_;
+ if (delete $self->{rpipe}) {
+ do_waitpid($self);
+ } else {
+ my ($env, $qx_cb, $qx_arg, $qx_buf) =
+ delete @$self{qw(psgi_env qx_cb qx_arg qx_buf)};
+ eval { $qx_cb->($qx_buf, $qx_arg) } if $qx_cb;
+ }
+}
+sub start ($$$) {
+ my ($self, $limiter, $start_cb) = @_;
if ($limiter->{running} < $limiter->{max}) {
- _do_spawn($self, $cb);
+ _do_spawn($self, $start_cb, $limiter);
} else {
- push @{$limiter->{run_queue}}, [ $self, $cb ];
+ push @{$limiter->{run_queue}}, [ $self, $start_cb ];
}
}
-sub _psgi_finish ($$) {
- my ($self, $env) = @_;
- my $err = $self->finish;
- if ($err && !$env->{'qspawn.quiet'}) {
- $err = join(' ', @{$self->{args}->[0]}).": $err\n";
- $env->{'psgi.errors'}->print($err);
+sub psgi_qx_init_cb {
+ my ($self) = @_;
+ my $async = delete $self->{async};
+ my ($r, $buf);
+ my $qx_fh = $self->{qx_fh};
+reread:
+ $r = sysread($self->{rpipe}, $buf, 65536);
+ if ($async) {
+ $async->async_pass($self->{psgi_env}->{'psgix.io'},
+ $qx_fh, \$buf);
+ } elsif (defined $r) {
+ $r ? (print $qx_fh $buf) : event_step($self, undef);
+ } else {
+ return if $! == EAGAIN; # try again when notified
+ goto reread if $! == EINTR;
+ event_step($self, $!);
+ }
+}
+
+sub psgi_qx_start {
+ my ($self) = @_;
+ if (my $async = $self->{psgi_env}->{'pi-httpd.async'}) {
+ # PublicInbox::HTTPD::Async->new(rpipe, $cb, cb_arg, $end_obj)
+ $self->{async} = $async->($self->{rpipe},
+ \&psgi_qx_init_cb, $self, $self);
+ # init_cb will call ->async_pass or ->close
+ } else { # generic PSGI
+ psgi_qx_init_cb($self) while $self->{qx_fh};
}
}
# $env is the PSGI env. As with ``/qx; only use this when output is small
# and safe to slurp.
sub psgi_qx {
- my ($self, $env, $limiter, $qx_cb) = @_;
- my $qx = PublicInbox::Qspawn::Qx->new;
- my $end = sub {
- _psgi_finish($self, $env);
- eval { $qx_cb->($qx) };
- $qx = undef;
- };
- my $rpipe;
- my $async = $env->{'pi-httpd.async'};
- my $cb = sub {
- my $r = sysread($rpipe, my $buf, 8192);
- if ($async) {
- $async->async_pass($env->{'psgix.io'}, $qx, \$buf);
- } elsif (defined $r) {
- $r ? $qx->write($buf) : $end->();
+ my ($self, $env, $limiter, $qx_cb, $qx_arg) = @_;
+ $self->{psgi_env} = $env;
+ my $qx_buf = '';
+ open(my $qx_fh, '+>', \$qx_buf) or die; # PerlIO::scalar
+ $self->{qx_cb} = $qx_cb;
+ $self->{qx_arg} = $qx_arg;
+ $self->{qx_fh} = $qx_fh;
+ $self->{qx_buf} = \$qx_buf;
+ $limiter ||= $def_limiter ||= PublicInbox::Qspawn::Limiter->new(32);
+ start($self, $limiter, \&psgi_qx_start);
+}
+
+# this is called on pipe EOF to reap the process, may be called
+# via PublicInbox::DS event loop OR via GetlineBody for generic
+# PSGI servers.
+sub event_step {
+ my ($self, $err) = @_; # $err: $!
+ log_err($self->{psgi_env}, "psgi_{return,qx} $err") if defined($err);
+ finish($self);
+ my ($fh, $qx_fh) = delete(@$self{qw(fh qx_fh)});
+ $fh->close if $fh; # async-only (psgi_return)
+}
+
+sub rd_hdr ($) {
+ my ($self) = @_;
+ # typically used for reading CGI headers
+ # we must loop until EAGAIN for EPOLLET in HTTPD/Async.pm
+ # We also need to check EINTR for generic PSGI servers.
+ my $ret;
+ my $total_rd = 0;
+ my $hdr_buf = $self->{hdr_buf};
+ my ($ph_cb, $ph_arg) = @{$self->{parse_hdr}};
+ do {
+ my $r = sysread($self->{rpipe}, $$hdr_buf, 4096,
+ length($$hdr_buf));
+ if (defined($r)) {
+ $total_rd += $r;
+ $ret = $ph_cb->($total_rd, $hdr_buf, $ph_arg);
} else {
- return if $!{EAGAIN} || $!{EINTR}; # loop again
- $end->();
+ # caller should notify us when it's ready:
+ return if $! == EAGAIN;
+ next if $! == EINTR; # immediate retry
+ log_err($self->{psgi_env}, "error reading header: $!");
+ $ret = [ 500, [], [ "Internal error\n" ] ];
}
- };
- $limiter ||= $def_limiter ||= PublicInbox::Qspawn::Limiter->new(32);
- $self->start($limiter, sub { # may run later, much later...
- ($rpipe) = @_;
+ } until (defined $ret);
+ delete $self->{parse_hdr}; # done parsing headers
+ $ret;
+}
+
+sub psgi_return_init_cb {
+ my ($self) = @_;
+ my $r = rd_hdr($self) or return;
+ my $env = $self->{psgi_env};
+ my $wcb = delete $env->{'qspawn.wcb'};
+ my $async = delete $self->{async};
+ if (scalar(@$r) == 3) { # error
if ($async) {
- # PublicInbox::HTTPD::Async->new($rpipe, $cb, $end)
- $async = $async->($rpipe, $cb, $end);
- } else { # generic PSGI
- $cb->() while $qx;
+ # calls rpipe->close && ->event_step
+ $async->close;
+ } else {
+ $self->{rpipe}->close;
+ event_step($self);
}
- });
+ $wcb->($r);
+ } elsif ($async) {
+ # done reading headers, handoff to read body
+ my $fh = $wcb->($r); # scalar @$r == 2
+ $self->{fh} = $fh;
+ $async->async_pass($env->{'psgix.io'}, $fh,
+ delete($self->{hdr_buf}));
+ } else { # for synchronous PSGI servers
+ require PublicInbox::GetlineBody;
+ $r->[2] = PublicInbox::GetlineBody->new($self->{rpipe},
+ \&event_step, $self,
+ ${$self->{hdr_buf}});
+ $wcb->($r);
+ }
+
+ # Workaround a leak under Perl 5.16.3 when combined with
+ # Plack::Middleware::Deflater:
+ $wcb = undef;
}
-# create a filter for "push"-based streaming PSGI writes used by HTTPD::Async
-sub filter_fh ($$) {
- my ($fh, $filter) = @_;
- Plack::Util::inline_object(
- close => sub {
- $fh->write($filter->(undef));
- $fh->close;
- },
- write => sub {
- $fh->write($filter->($_[0]));
- });
+sub psgi_return_start { # may run later, much later...
+ my ($self) = @_;
+ if (my $async = $self->{psgi_env}->{'pi-httpd.async'}) {
+ # PublicInbox::HTTPD::Async->new(rpipe, $cb, $cb_arg, $end_obj)
+ $self->{async} = $async->($self->{rpipe},
+ \&psgi_return_init_cb, $self, $self);
+ } else { # generic PSGI
+ psgi_return_init_cb($self) while $self->{parse_hdr};
+ }
}
# Used for streaming the stdout of one process as a PSGI response.
# psgi_return will return an anonymous
# sub for the PSGI server to call
#
-# $env->{'qspawn.filter'} - filter callback, receives a string as input,
-# undef on EOF
-#
# $limiter - the Limiter object to use (uses the def_limiter if not given)
#
# $parse_hdr - Initial read function; often for parsing CGI header output.
# psgix.io. 3-element arrays means the body is available
# immediately (or streamed via ->getline (pull-based)).
sub psgi_return {
- my ($self, $env, $limiter, $parse_hdr) = @_;
- my ($fh, $rpipe);
- my $end = sub {
- _psgi_finish($self, $env);
- $fh->close if $fh; # async-only
- };
-
- my $buf = '';
- my $rd_hdr = sub {
- my $r = sysread($rpipe, $buf, 1024, length($buf));
- return if !defined($r) && ($!{EINTR} || $!{EAGAIN});
- $parse_hdr->($r, \$buf);
- };
-
- my $wcb = delete $env->{'qspawn.wcb'};
- my $async = $env->{'pi-httpd.async'};
-
- my $cb = sub {
- my $r = $rd_hdr->() or return;
- $rd_hdr = undef;
- my $filter = delete $env->{'qspawn.filter'};
- if (scalar(@$r) == 3) { # error
- if ($async) {
- $async->close; # calls rpipe->close and $end
- } else {
- $rpipe->close;
- $end->();
- }
- $wcb->($r);
- } elsif ($async) {
- $fh = $wcb->($r); # scalar @$r == 2
- $fh = filter_fh($fh, $filter) if $filter;
- $async->async_pass($env->{'psgix.io'}, $fh, \$buf);
- } else { # for synchronous PSGI servers
- require PublicInbox::GetlineBody;
- $r->[2] = PublicInbox::GetlineBody->new($rpipe, $end,
- $buf, $filter);
- $wcb->($r);
- }
- };
+ my ($self, $env, $limiter, $parse_hdr, $hdr_arg) = @_;
+ $self->{psgi_env} = $env;
+ $self->{hdr_buf} = \(my $hdr_buf = '');
+ $self->{parse_hdr} = [ $parse_hdr, $hdr_arg ];
$limiter ||= $def_limiter ||= PublicInbox::Qspawn::Limiter->new(32);
- my $start_cb = sub { # may run later, much later...
- ($rpipe) = @_;
- if ($async) {
- # PublicInbox::HTTPD::Async->new($rpipe, $cb, $end)
- $async = $async->($rpipe, $cb, $end);
- } else { # generic PSGI
- $cb->() while $rd_hdr;
- }
- };
# the caller already captured the PSGI write callback from
# the PSGI server, so we can call ->start, here:
- return $self->start($limiter, $start_cb) if $wcb;
+ $env->{'qspawn.wcb'} and
+ return start($self, $limiter, \&psgi_return_start);
# the caller will return this sub to the PSGI server, so
- # it can set the response callback (that is, for PublicInbox::HTTP,
- # the chunked_wcb or identity_wcb callback), but other HTTP servers
- # are supported:
+ # it can set the response callback (that is, for
+ # PublicInbox::HTTP, the chunked_wcb or identity_wcb callback),
+ # but other HTTP servers are supported:
sub {
- ($wcb) = @_;
- $self->start($limiter, $start_cb);
- };
+ $env->{'qspawn.wcb'} = $_[0];
+ start($self, $limiter, \&psgi_return_start);
+ }
}
package PublicInbox::Qspawn::Limiter;
max => $max || 32,
running => 0,
run_queue => [],
+ # RLIMIT_CPU => undef,
+ # RLIMIT_DATA => undef,
+ # RLIMIT_CORE => undef,
}, $class;
}
-# captures everything into a buffer and executes a callback when done
-package PublicInbox::Qspawn::Qx;
-use strict;
-use warnings;
-
-sub new {
- my ($class) = @_;
- my $buf = '';
- bless \$buf, $class;
-}
-
-# called by PublicInbox::HTTPD::Async ($fh->write)
-sub write {
- ${$_[0]} .= $_[1];
- undef;
+sub setup_rlimit {
+ my ($self, $name, $config) = @_;
+ foreach my $rlim (PublicInbox::Spawn::RLIMITS()) {
+ my $k = lc($rlim);
+ $k =~ tr/_//d;
+ $k = "publicinboxlimiter.$name.$k";
+ defined(my $v = $config->{$k}) or next;
+ my @rlimit = split(/\s*,\s*/, $v);
+ if (scalar(@rlimit) == 1) {
+ push @rlimit, $rlimit[0];
+ } elsif (scalar(@rlimit) != 2) {
+ warn "could not parse $k: $v\n";
+ }
+ eval { require BSD::Resource };
+ if ($@) {
+ warn "BSD::Resource missing for $rlim";
+ next;
+ }
+ foreach my $i (0..$#rlimit) {
+ next if $rlimit[$i] ne 'INFINITY';
+ $rlimit[$i] = BSD::Resource::RLIM_INFINITY();
+ }
+ $self->{$rlim} = \@rlimit;
+ }
}
1;