1 Subject: Post to $listaddr$ denied: $subject$
3 Content-Type: multipart/mixed;
4 boundary="=_$random0$$random1$_="
5 Content-Transfer-Encoding: 8bit
7 --=_$random0$$random1$_=
8 Content-Type: text/plain; charset=utf8
9 Content-Transfer-Encoding: 8bit
11 %wrap%Hi, this is the Mlmmj program managing the $listaddr$ mailing list.
13 %wrap%The message from $posteraddr$ with subject "$subject" was unable
14 to be delivered to the list
15 %ifreason maxmailsize%
16 because it exceeded the maximum allowed message size of $maxmailsize$
20 because the list address was not found in either the To: or CC: header.
23 because of an access rule set up by the list administrator.
26 because a moderator rejected it.
28 %ifreason subonlypost%
29 because you are not a list subscriber.
32 %ifncontrol closedlist%%ifncontrol closedlistsub%
33 However, this is an open list. If you wish, you can simultaneously
34 subscribe and release your post by sending a message to
35 $listsubreleaseaddr$ which can usually be done simply by replying to
36 this message. The subject and the body of the message can be anything.
37 %ifncontrol nodigestsub%
40 Or you can simultaneously subscribe to the digest version of the list
41 and release your post by sending a message to $nomailsubreleaseaddr$
42 and you will receive multiple posts in a single message, at regular
43 intervals, or when a lot of posts have accumulated.
45 %ifncontrol nonomailsub%
48 Or you can simultaneously subscribe to the no-mail version of the list
49 and release your post by sending a message to $nomailsubreleaseaddr$
50 and you will not receive posts sent to the list. This means you
51 potentially will not see replies to your message, unless you follow
52 the list using a web archive or have another email address subscribed
53 to another version of the list.
56 %ifcontrol closedlist closedlistsub%
57 If you wish to become a subscriber, you will need to contact a list
58 administrator. You can email $listowner$ to contact the list owner.
62 If you believe you are a subscriber, you are probably subscribed with a
63 different email address. To find out which address you are subscribed
64 with, refer to the message welcoming you to the list, or look at the
65 envelope "Return-Path" header of a message you receive from the list.
68 %ifreason maxmailsize%
69 (The beginning of the denied message is below.)
71 (The denied message is below.)
74 --=_$random0$$random1$_=
75 Content-Type: message/rfc822
76 Content-Transfer-Encoding: 8bit
77 Content-Disposition: inline; filename="message.eml"
79 %ifreason maxmailsize%
82 $originalmail1000000000$
84 --=_$random0$$random1$_=--