package PublicInbox::LeiQuery;
use strict;
use v5.10.1;
-use PublicInbox::MID qw($MID_EXTRACT);
-use POSIX qw(strftime);
-use PublicInbox::Address qw(pairs);
-use PublicInbox::Search qw(get_pct);
-
-sub _iso8601 ($) { strftime('%Y-%m-%dT%H:%M:%SZ', gmtime($_[0])) }
-
-# prepares an smsg for JSON
-sub _smsg_unbless ($) {
- my ($smsg) = @_;
-
- delete @$smsg{qw(lines bytes)};
- $smsg->{rcvd} = _iso8601(delete $smsg->{ts}); # JMAP receivedAt
- $smsg->{dt} = _iso8601(delete $smsg->{ds}); # JMAP UTCDate
-
- if (my $r = delete $smsg->{references}) {
- $smsg->{references} = [
- map { "<$_>" } ($r =~ m/$MID_EXTRACT/go) ];
- }
- if (my $m = delete($smsg->{mid})) {
- $smsg->{'m'} = "<$m>";
- }
- # XXX breaking to/cc, into structured arrays or tables which
- # distinguish "$phrase <$address>" causes pretty printing JSON
- # to take up too much vertical space. I can't get either
- # Cpanel::JSON::XS or JSON::XS or jq(1) only indent when
- # wrapping is necessary, rather than blindly indenting and
- # adding vertical space everywhere.
- for my $f (qw(from to cc)) {
- my $v = delete $smsg->{$f} or next;
- $smsg->{substr($f, 0, 1)} = $v;
- }
- $smsg->{'s'} = delete $smsg->{subject};
- # can we be bothered to parse From/To/Cc into arrays?
- scalar { %$smsg }; # unbless
-}
+use PublicInbox::DS qw(dwaitpid);
sub _vivify_external { # _externals_each callback
my ($src, $dir) = @_;
my $sto = $self->_lei_store(1);
my $cfg = $self->_lei_cfg(1);
my $opt = $self->{opt};
- my $qstr = join(' ', map {;
- # Consider spaces in argv to be for phrase search in Xapian.
- # In other words, the users should need only care about
- # normal shell quotes and not have to learn Xapian quoting.
- /\s/ ? (s/\A(\w+:)// ? qq{$1"$_"} : qq{"$_"}) : $_
- } @argv);
- $opt->{limit} //= 10000;
- my $lxs;
- require PublicInbox::LeiDedupe;
- my $dd = PublicInbox::LeiDedupe->new($self);
# --local is enabled by default
- my @src = $opt->{'local'} ? ($sto->search) : ();
+ # src: LeiXSearch || LeiSearch || Inbox
+ my @srcs;
+ require PublicInbox::LeiXSearch;
+ require PublicInbox::LeiOverview;
+ require PublicInbox::LeiDedupe;
+ my $lxs = PublicInbox::LeiXSearch->new;
# --external is enabled by default, but allow --no-external
if ($opt->{external} // 1) {
- $self->_externals_each(\&_vivify_external, \@src);
- # {tid} is not unique between indices, so we have to search
- # each src individually
- if (!$opt->{thread}) {
- require PublicInbox::LeiXSearch;
- my $lxs = PublicInbox::LeiXSearch->new;
- # local is always first
- $lxs->attach_external($_) for @src;
- @src = ($lxs);
- }
- }
- my $out = $self->{output} // '-';
- $out = 'json:/dev/stdout' if $out eq '-';
- my $isatty = -t $self->{1};
- $self->start_pager if $isatty;
- my $json = substr($out, 0, 5) eq 'json:' ?
- ref(PublicInbox::Config->json)->new : undef;
- if ($json) {
- if ($opt->{pretty} //= $isatty) {
- $json->pretty(1)->space_before(0);
- $json->indent_length($opt->{indent} // 2);
- }
- $json->utf8; # avoid Wide character in print warnings
- $json->ascii(1) if $opt->{ascii}; # for "\uXXXX"
- $json->canonical;
+ $self->_externals_each(\&_vivify_external, \@srcs);
}
+ my $j = $opt->{jobs} // (scalar(@srcs) > 3 ? 3 : scalar(@srcs));
+ $j = 1 if !$opt->{thread};
+ $j++ if $opt->{'local'}; # for sto->search below
+ $self->atfork_prepare_wq($lxs);
+ $lxs->wq_workers_start('lei_xsearch', $j, $self->oldset)
+ // $lxs->wq_workers($j);
- # src: LeiXSearch || LeiSearch || Inbox
+ unshift(@srcs, $sto->search) if $opt->{'local'};
+ # no forking workers after this
+ $self->{ovv} = PublicInbox::LeiOverview->new($self);
+ $self->{dd} = PublicInbox::LeiDedupe->new($self);
my %mset_opt = map { $_ => $opt->{$_} } qw(thread limit offset);
- delete $mset_opt{limit} if $opt->{limit} < 0;
$mset_opt{asc} = $opt->{'reverse'} ? 1 : 0;
+ $mset_opt{qstr} = join(' ', map {;
+ # Consider spaces in argv to be for phrase search in Xapian.
+ # In other words, the users should need only care about
+ # normal shell quotes and not have to learn Xapian quoting.
+ /\s/ ? (s/\A(\w+:)// ? qq{$1"$_"} : qq{"$_"}) : $_
+ } @argv);
if (defined(my $sort = $opt->{'sort'})) {
if ($sort eq 'relevance') {
$mset_opt{relevance} = 1;
# descending docid order
$mset_opt{relevance} //= -2 if $opt->{thread};
# my $wcb = PublicInbox::LeiToMail->write_cb($out, $self);
-
- # even w/o pretty, do the equivalent of a --pretty=oneline
- # output so "lei q SEARCH_TERMS | wc -l" can be useful:
- my $ORS = $json ? ($opt->{pretty} ? ', ' : ",\n") : "\n";
- my $buf;
-
- # we can generate too many records to hold in RAM, so we stream
- # and fake a JSON array starting here:
- $self->out('[') if $json;
- my $emit_cb = sub {
- my ($smsg) = @_;
- delete @$smsg{qw(tid num)}; # only makes sense if single src
- chomp($buf = $json->encode(_smsg_unbless($smsg)));
- };
- $dd->prepare_dedupe;
- for my $src (@src) {
- my $srch = $src->search;
- my $over = $src->over;
- my $smsg_for = $src->can('smsg_for'); # LeiXSearch
- my $mo = { %mset_opt };
- my $mset = $srch->mset($qstr, $mo);
- my $ctx = {};
- if ($smsg_for) {
- for my $it ($mset->items) {
- my $smsg = $smsg_for->($srch, $it) or next;
- next if $dd->is_smsg_dup($smsg);
- $self->out($buf .= $ORS) if defined $buf;
- $smsg->{relevance} = get_pct($it);
- $emit_cb->($smsg);
- }
- } else { # --thread
- my $ids = $srch->mset_to_artnums($mset, $mo);
- $ctx->{ids} = $ids;
- my $i = 0;
- my %n2p = map {
- ($ids->[$i++], get_pct($_));
- } $mset->items;
- undef $mset;
- while ($over && $over->expand_thread($ctx)) {
- for my $n (@{$ctx->{xids}}) {
- my $t = $over->get_art($n) or next;
- next if $dd->is_smsg_dup($t);
- if (my $p = delete $n2p{$t->{num}}) {
- $t->{relevance} = $p;
- }
- $self->out($buf .= $ORS);
- $emit_cb->($t);
- }
- @{$ctx->{xids}} = ();
- }
- }
- }
- $self->out($buf .= "]\n"); # done
+ $self->{mset_opt} = \%mset_opt;
+ $self->{ovv}->ovv_begin($self);
+ $lxs->do_query($self, \@srcs);
}
1;